| 1. | Design of smart sensor based on tcp ip
的智能传感器设计 |
| 2. | 2 ) the principle , the architecture and the design of the data bus , smart sensors and smart actuators are researched
研究了数据总线、智能传感器和智能执行机构的工作原理、构成及设计。 |
| 3. | The corporations of tmi , hp and ni produce a series of networked smart sensor nodes in succession supporting ieee1451 standard
在ncap中实现了精简的tcp / ip协议栈、 ieee1451协议栈以及校正引擎。 |
| 4. | The mechatronics approach emphasis the use of smart sensors and actuators to reduce the effort involved with complicated control system design
所谓机电整合(或说电子机械)强调的是以智慧型的感应器与驱动器减低控制系统设计的复杂程度。 |
| 5. | Design plan of the smart devices ( including smart sensors and smart actuators ) based on dsp and can buses was proposed . the anti - interference technology of the smart devices was discussed
提出了基于dsp和can总线的智能装置(包括智能传感器和智能执行机构)设计方案，讨论了智能装置的抗干扰技术。 |
| 6. | Cmos process is used to realize the one chip integration of the sensor array and processing circuits , which accords with the development direction of soc ( system on a chip ) and smart sensor
传感器使用标准cmos工艺制造，将传感阵列与信号处理电路集成在同一芯片上，可以实现传感器的soc集成和智能化( smartsensor )设计。 |
| 7. | At monitoring field rs - 485 bus is used as the first level monitoring system because of multislaver and distance as far as 100m . the part is constituted by smart sensors and monitoring instrument
在监测现场，考虑到监测点的数量多及距离在100米以上，采用了基于rs - 485的现场总线组成第一级智能监测系统，该系统由智能化传感器与监测仪组成。 |
| 8. | With the development of computer control system , especially of the system based on fieldbus with multi - sensor , the intelligent sensor or smart sensor , as a new research field , is attracting more and more people ' s attention
随着计算机测控系统特别是基于现场总线的多传感器计算机测控系统的发展，智能传感器系统作为一个与之相应的新兴研究方向，正受到人们越来越多的关注。 |
| 9. | Then , the conception of smart sensor is introduced for multi - sensor system design to improve systemic characteristic including : flexibility , universality , extendability , extendability , data preprocessing , self - adjustability , data transmission by bus , and so on
然后本文提出了多传感器系统的底层传感器模块应具有通用性、可扩展性、对上层接口透明、开发传承性、初级预处理和基于总线的数据传输等设计要求。 |
| 10. | The sensor ’ s design and manufacture will be independent of field - networks via this standard , which resolve the incompatible problems between various sensor manufacturers . at present , it has given a further research on ieee1451 standard networked smart sensor abroad
论文在以太网总线基础上对ieee1451标准的网络化智能传感器进行了研究,研制了符合ieee1451 . 2标准的网络应用处理器ncap以及系列智能变送器模块stim 。 |
